Crown Dritherm Cavity Slab Wool Insulation

1200X455X85mm(14)
37 Standard

DriTherm Cavity Slabs are semi-rigid or rigid slabs of non-combustible, glass mineral wool with a water-repellent additive. They are 455mm wide to suit standard vertical wall tie spacings, ensuring a closed joint with adjacent slabs. DriTherm Cavity Slabs have a special additive to make the product water repellent
DriTherm Cavity Slab 37 Standard has a thermal conductivity ranging from 0.035 to 0.037 W/mK

DriTherm Cavity Slabs are for the thermal insulation of masonry cavity external walls, either partially filling or fully filling the cavity. They are approved for use in buildings up to 12m high in any exposure zone and for use in multi-storey applications up to 25m in height.

DriTherm Cavity Slabs are non-combustible inorganic glass wool, defined as mineral wool in BS 3533: 1981 and are manufactured in accordance with BSI Quality Assurance Standard BS EN ISO 9001: 2000.

DriTherm Cavity Slabs are odourless, rot proof, non-hygroscopic, do not sustain vermin and will not encourage the growth of fungi, mould or bacteria.

ECOSE® Technology

Knauf Insulation mineral wool products with ECOSE® Technology benefit from a natural, formaldehyde-free binder made from rapidly renewable organic materials, instead of petroleum-based chemicals, which is up to 70% less energy intensive.

The technology has been developed for Knauf Insulation’s glass and rock mineral wool products, enhancing their environmental credentials without affecting the thermal, acoustic or fire performance. Insulation products made with ECOSE® Technology contain no dye or artificial colours – the colour is completely natural.
 

DriTherm Cavity Slabs are free from CFCs, HCFCs and any other material with ozone depletion potential in its manufacture and content and represents no known threat to the environment.

DriTherm Cavity Slab’s manufacture has a low impact on the environment and is classified as Zero ODP and Zero GWP.